LIST OF PUBLICATIONS:

2024
 
Publications in
Scientific Journals

Mohammad Harun-Ur-Rashid , Abu Bin Imran, Emerging Trends in Engineering Polymers: A Paradigm Shift in Material Engineering, Recent Progress in Materials, 2024, 6(3), 024; https://doi.org/10.21926/rpm.2403024

Khondaker Afrina Hoque, Sharmin Ara Sathi, Farjana Akter, Tania Akter, Tahsin Ahmed, Wahid Ullah, Kazi Arafin, Mohammad Sayadur Rahaman, Hossain M. Shahadat, Abu Bin Imran, Al-Nakib Chowdhury. Recent Advances on Photocatalytic CO2 reduction using CeO2-based Photocatalysts: A Review, Journal of Environmental Chemical Engineering, 2024, 113487, ISSN 2213-3437, https://doi.org/10.1016/j.jece.2024.113487

Mithun Rani Nath, Al-Nakib Chowdhury, Kaushik Pal, Abu Bin Imran, Innovations in Nanomaterial-Embedded Polymer Membranes for Water and Wastewater Treatment: A comprehensive review, Nano Express, IOP Sciences, 2024, https://doi.org/10.1088/2632-959X/ad3e1b

Bohan Yin, Monika Gosecka, M. Bodaghi, Daniel Crespy, George Youssef, Jagan Mohan Dodda, Siu Hong Dexter Wong, Abu Bin Imran, Mateusz Gosecki, Arjaree Jobdeedamrong, M. Afzali Naniz, A. Zolfagharian, Engineering multifunctional dynamic hydrogel for biomedical and tissue regenerative applications, Chemical Engineering Journal, 2024, 150403, ISSN 1385-8947, https://doi.org/10.1016/j.cej.2024.150403.

Mohammad Harun-Ur-Rashid, Israt Jahan, Md. Jahidul Islam, Ajoy Kumer, Muhammad Nurul Huda, Abu Bin Imran, Soumaya Gouadria, Sarah A. Alsalhi, Global Advances and Smart Innovations in Supramolecular Polymers, Journal of Molecular Structure, 2024, 137665, ISSN 0022-2860, https://doi.org/10.1016/j.molstruc.2024.137665

K.B. C. Imani, J. M. Dodda, J. Yoon, F. G. Torres, A. B. Imran, G. R. Deen, R. Al-Ansari, Seamless Integration of Conducting Hydrogels in Daily Life: From Preparation to Wearable Application. Adv. Sci. 2024, 2306784. https://doi.org/10.1002/advs.202306784

Book chapters:

Md. Ruhul Amin Foisal and Abu Bin Imran (2024), Diverse Applications of Graphene-Based Photocatalysts, In: Naseer, M.N., Ikram, M., Zaidi, A.A., Abdul Wahab, Y., Johan, M.R. (eds) Graphene-Based Photocatalysts for Hydrogen Production and Environmental Remediation. Advanced Structured Materials, vol 219. Springer, Cham. https://doi.org/10.1007/978-3-031-68464-7_22

Mohammad Harun-Ur-Rashid, Abu Bin Imran, and Md. Abu Bin Hasan Susan “Emerging 3D Printed Polymers and Composites
for Water Quality Preservation”, in Elvis Fosso-Kankeu and Suprakas S. Ray
(eds), Reference Module in Materials Science and Materials Engineering, Elsevier, 1-40, 2024, ISBN 9780128035818, https://doi.org/10.1016/B978-0-323-95486-0.00010-7

Mohammad Harun-Ur-Rashid, Abu Bin Imran, and Md. Abu Bin Hasan Susan “Magnetic Polymer Nanocomposites for Removal of Dyes and Metals From Wastewater”, in Elvis Fosso-Kankeu and Suprakas S. Ray (eds), Reference Module in Materials Science and Materials Engineering, Elsevier, 1-29, 2024, ISBN 9780128035818, https://doi.org/10.1016/B978-0-323-95486-0.00008-9

Harun-Ur-Rashid, Mohammad, Naidu Krishna, Suresh Babu, Golla, Narasimha and Bin Imran, Abu. “12 Polyphenol oxidases: the future toward global sustainability”. Polyphenol Oxidases: Function, Wastewater Remediation, and Biosensors, edited by Pradeep Verma, Komal Agrawal and Maulin P. Shah, Berlin, Boston: De Gruyter, 2024, pp. 309-344. https://doi.org/10.1515/9783111033525-012

 

2023

Publications in
Scientific Journals

Hasanul Banna Muhammad Zukaul Islam, Suresh Babu Naidu Krishna, and Abu Bin Imran, Enhancing the Mechanical Properties of Hydrogels with Vinyl-Functionalized Nanocrystalline Cellulose as a Green Crosslinker, Nanotechnology, 2023 https://doi.org/10.1088/1361-6528/acf93b

Mohammad Harun-Ur-Rashid, Israt Jahan, Tahmina Foyez, and Abu Bin Imran (2023) “Bio-Inspired Nanomaterials for Micro/NanoDevices: A New Era in Biomedical Applications”, in Special Issue “Nanomaterials for Micro/Nano Devices” of Micromachines, 2023, 14(9), 1786; https://doi.org/10.3390/mi14091786

Md. Rezaul Karim, Mohammad Harun‐Ur‐Rashid, and Abu Bin Imran. Effect ofu sizes of vinyl modified narrow-dispersed silica cross-linker on the mechanical properties of acrylamide based hydrogel. Sci Rep 13, 5089 (2023). https://doi.org/10.1038/s41598-023-32185-4

Mohammad Harun‐Ur‐Rashid, Kaushik Pal, and Abu Bin Imran. Hybrid Nanocomposite Fabrication of Nanocatalyst with Enhanced and Stable Photocatalytic Activity. Topics in Catalysis (2023), 1-29. https://doi.org/10.1007/s11244-023-01809-4

Book chapters:

Emerging vaccine for treatment of cancer via Nanotechnology, Yeasmin Begum, Tahmina Foyez, and Abu Bin Imran, In: Nanovaccinology: Clinical application of nanostructured materials research to translational medicine, Prof.(Dr) Kaushik Pal (Editor), Springer, Springer International Publishing AG, Berlin, Germany, pp 227–244, 2023, ISBN978-3-031-35394-9  https://doi.org/10.1007/978-3-031-35395-6_13

Recent advancement of nanostructured materials for clinical challenges in vaccinology, Mohammad Harun-Ur-Rashid, Israt Jahan, and Abu Bin Imran, In: Nanovaccinology: Clinical application of nanostructured materials research to translational medicine, Prof.(Dr) Kaushik Pal (Editor), Springer, Springer International Publishing AG, Berlin, Germany, pp 135–160, 2023. ISBN978-3-031-35394-9  https://doi.org/10.1007/978-3-031-35395-6_8

 

Prospective Nanomaterials for Food Packaging and Safety, Mohammad Harun-Ur-Rashid, Israt Jahan, Abu Bin Imran, and Md. Abu Bin Hasan Susan, In : Emerging nanomaterials and their impact on society in the 21st century, Prof. N.B. Singh,  Prof. Md. Abu Bin Hasan Susan, and Dr. Ratiram Gomaji Chaudhary (Editors), Materials Research Forum LLC, Millersville, PA 17551, Materials Research Foundations 141 (2023) 327-352 https://doi.org/10.21741/9781644902295-13

 

Nanomaterials in Automobile Sector, Mohammad Harun-Ur-Rashid, and Abu Bin Imran, ,In : Emerging nanomaterials and their impact on society in the 21st century, Prof. N.B. Singh,  Prof. Md. Abu Bin Hasan Susan, and Dr. Ratiram Gomaji Chaudhary (Editors), Materials Research Forum LLC, Millersville, PA 17551, Materials Research Foundations 141 (2023) 124-150 https://doi.org/10.21741/9781644902295-6

 Nanomaterials in Pharmaceuticals, Tahmina Foyez, and Abu Bin Imran, ,In : Emerging nanomaterialsd their impact on society in the 21st century, Prof. N.B. Singh,  Prof. Md. Abu Bin Hasan Susan, and Dr. Ratiram Gomaji Chaudhary (Editors), Materials Research Forum LLC, Millersville, PA 17551, Materials Research Foundations 141 (2023) 218-245, https://doi.org/10.21741/9781644902295-9

Engineered Nanomaterials for Energy Conversion Cells, Mohammad Harun-Ur-Rashid, and Abu Bin Imran, ,In : Applications of Emerging Nanomaterials and Nanotechnology, Prof. N.B. Singh,  Prof. Md. Abu Bin Hasan Susan, and Dr. Ratiram Gomaji Chaudhary (Editors), Materials Research Forum LLC, Millersville, PA 17551. Materials Research Foundations 148 (2023), 103-126  https://doi.org/10.21741/9781644902554-4

 

Stimuli-responsive and Self-healing Multicomponent Hydrogels for Biomedical Applications, Aminur Rahman and Abu Bin Imran, In: Multicomponent Hydrogels: Smart Materials for Biomedical Applications, Jagan Mohan Dodda, Kalim Deshmukh, Deon Bezuidenhout (Editors), The Royal Society of Chemistry, Cambridge, UK, 2023, Ch17, pp578-603

https://doi.org/10.1039/BK9781837670055-00578

Fire-Resistant Polymeric Foams and Their Applications, Mohammad Harun-Ur-Rashid, Abu Bin Imran, and Md. Abu Bin Hasan Susan, In: Polymeric Foams: Applications of Polymeric Foams (Volume 2), Prof.(Dr) Ram Gupta (Editor), ACS Symposium Series, Vol. 1440 eISBN: 9780841297166, American Chemical Society, USA, Chapter 5, pp 97-121, 2023

https://pubs.acs.org/doi/full/10.1021/bk-2023-1440.ch005

2022

Book chapters:

Natural Fiber-reinforced Nanocomposites in Automotive Industry, Abu Bin Imran and Md. Abu Bin Hasan Susan, In: NANOCOMPOSITES FOR AUTOMOTIVE APPLICATION 1st edition, Huaihe Song, Tuan Nguyen, Ghulam Yasin, Nakshatra Singh, Ram Gupta (Editors), ISBN: 9780323905244, Elsevier, 85-103, (2022) https://doi.org/10.1016/B978-0-323-90524-4.00005-0

Nanotechnology in vaccine development and constraints, Tahmina Foyez and Abu Bin Imran, In: Nanovaccinology outbreak as targeted therapeutics, Kaushik Pal (Editor), Wiley-Scrivener Publisher,1-20,  2022 https://doi.org/10.1002/9781119858041.ch1

Organo-Metallic Nanomaterials Synthesis and Sustainable Green Nanotechnology Applications, Mohammad Harun-Ur-Rashid, and Abu Bin Imran, In: Handbook: Green
Nanoarchtectonics, Smart Natural Materials, Prof.(Dr) Kaushik Pal (Editor), Jenny Stanford Publishers, CRC press, 249-270, 2022, eBook ISBN 9781003318606
https://doi.org/10.1201/9781003318606

 

Publications in
Scientific Journals

 

Green Polymer Nanocomposites in Automotive and Packaging Industries, Mohammad Harun-Ur-Rashid, Abu Bin Imran, and Md. Abu Bin Hasan Susan, Current
Pharmaceutical Biotechnology, Bentham Science publishers, 2022; 23() .
https://dx.doi.org/10.2174/1389201023666220506111027

 

Advanced Functional Polymers: Properties and Supramolecular Phenomena in Hydrogels andPolyrotaxane-based Materials, Abu Bin Ihsan, Abu Bin Imran, Md. Abu Bin Hasanu Susan, Chemistry Africa (2022). https://doi.org/10.1007/s42250-022-00460-y

 Mohammad Harun-Ur-Rashid, Tahmina Foyez, Israt Jahan, Kaushik Pal, and Abu Bin Imran, Rapid diagnosis of COVID-19 via nano-biosensor implemented biomedical
utilization: a systematic review, RSC Advances, 2022, 12, 9445–9465   
https://doi.org/10.1039/D2RA01293F

 

Publications in
Scientific Meetings/Bulletins

Abu Bin Imran, Sarmin Akter, Rafel Verduzco, Development of smart porous hydrogel for detection and removal of food adulterants, Indo-African International Conference on Emerging Materials Science and Technologies (IAFICEMST’2022), Jointly organized by Durban University of Technology, SA and Chandigarh University, India. Page 11, August 03-05, 2022. ISBN-9871919858326

 

2021

 Book chapters:

 Fabrication of Stretchable Composite Thin Film for   Superconductor Applications. Mohammad Harun-Ur-Rashid, Tahmina Foyez, and Abu Bin Imran in Sensors for
Stretchable Electronics in Nanotechnology, Kaushik Pal (Editor),  CRC press, Taylor and Francis Group, Florida, USA. September 1, 63-78,  2021. ISBN
9780367642815

 Publications in
Scientific Journals

 

Syed Sadman Mahmud, Mukta Moni, Abu Bin Imran, and Tahmina Foyez. Analysis of the suspected cancer‐causing potassium bromate additive in bread samples
available on the market in and around Dhaka City in Bangladesh. Food Sci Nutr. 2021
https://doi.org/10.1002/fsn3.2338

 Mohammad Motiur Rahman, Abu Hasan Howlader, Ehsanur Rahman, Hridoy Roy, MohammadMozammal Hosen, Md. Mahbubur Rahman, Stephen Don Sarkar, Chanchal Kumar Roy, Abu Bin Imran & Shakhawat H. Firoz. Development of functionalized nanocrystalline cellulose-based polyelectrolytes with high water uptake.
Polym J (2021). doi: 10.1038/s41428-021-00483-1
https://doi.org/10.1038/s41428-021-00483-1

 Hasanul Banna Muhammad Zukaul Islam, Md. Abu Bin Hasan Susan, and Abu Bin Imran. High-strength potato starch/hectorite clay-based nanocomposite film:
synthesis and characterization. Iran Polym J (2021).
https://doi.org/10.1007/s13726-021-00907-y

 Md. Kausar Ahmed, Ajoy Kumer and Abu Bin Imran. Facile fabrication of polymer network using click chemistry and their computational study. R.  Soc. Open  Sci. 8: 202056, 2021. https://doi.org/10.1098/rsos.202056

 

 Student Supervision:

 Master of Philosophy: Preparation and Characterization of Thermo and Magnetic Responsive Hydrogel Particles for Removal of Heavy Metal Ions, Department of Chemistry, Bangladesh University of Engineering and Technology, Dhaka-1000, Bangladesh (Students name: Fahima Tajrin, STUDENT ID NO: 0417033207, Session:    April 2017, Date of degree awarded: February 16, 2021)

 Master of Science: A Porous Structural Colored Hydrogel for Visual Detection and Removal of Toxic Ionic Species, Department of Chemistry, Bangladesh University of Engineering and Technology, Dhaka-1000, Bangladesh (SARMIN AKTER, Student ID: 0417032703 Session: April 2017, Date of degree awarded: February 6, 2021)

 Master of Science: Self-Healable and Mechanically Strong Hydrogel Using Modified Nano-Cellulose Cross Linker, Department of Chemistry, Bangladesh University of Engineering and Technology, Dhaka-1000, Bangladesh (Shyla Chowdhury, Student ID: 1018032714(F) Session:  October, 2018, Date of degree awarded: February 20, 2021)

 Doctor of Philosophy: Design and Fabrication of Biofriendly Crosslinkers and Their Polymeric Nanocomposite Materials, Department of Chemistry,
Bangladesh University of Engineering and Technology, Dhaka-1000, Bangladesh (Students name: H.B. Muhammad Zukaul Islam, Student ID: 101503420, Session:           October, 2015, Date of degree awarded: February 24, 2021)

 Publications in
Scientific Meetings/Bulletins

 Md. Kausar Ahmed, Ajoy Kumer and Abu Bin Imran. Step-wise synthesis of polymer network using click chemistry and their computational study. 6th conference (virtual) of Bangladeshu Crystallographic Association, Dhaka, Bangladesh.  January 15-16, 2021.

 Solaiman, Aminur Rahman, Syed Abdul Monim, Tahmina Foyez, and Abu Bin Imran. Synthesis of conductive, bioactive and wound healing nanocomposite hydrogels via homogeneous dispersion of bioactive silver nanoparticles, International Summits and Conference on Materials Science, Nanotechnology, & Bio-manufacturing (ISCMNB’2021), Organized by Department of Polymer, Institut Kemahiran Tinggi Belia Negara (IKTBN) Sepang, Selangor, Malaysia. 25-28 May,2021 Malaysia. (Invited
Lecture)

 Guest speaker for the Ernest Just/Percy Julian Lecture Series, Development of smart porous hydrogel for detection and removal of food adulterants. Hosted by Coppin State University, Baltimore, MD 21216, USA. Sponsored by Outreach Lecturing Fund (OLF), Fulbright Visiting Scholar Program 2021. September 10, 2021

 

 

2020

 Book chapters:

 Design, development, characterization and application of smart polymeric hydrogel, Abu Bin Imran in Manufacturing Systems: Recent Progress and Future Directions, Dr. Mohamed Arezki Mellal (Editor), Nova Science Publishers, Inc., 400 Oser Avenue, Suite 1600, Hauppauge, NY 11788-3619, USA, 2020. ISBN: 978-1-53618-676-5

  Publications in
Scientific Journals

 Noman Chowdhury, Solaiman, Chanchal Kumar Roy, Shakhawat H. Firoz, Tahmina Foyez, and Abu Bin Imran. Role of Ionic Moieties in Hydrogel Networks to Remove
Heavy Metal Ions from Water, ACS Omega, American Chemical Society, 6, 1, 836–844. December 31, 2020.
https://doi.org/10.1021/acsomega.0c05411

 Md. Rezaul Karim, Mohammad Harun‐Ur‐Rashid, and Abu Bin Imran. Highly Stretchable Hydrogel Using Vinyl Modified Narrow Dispersed Silica Particles as
Cross‐Linker, ChemistrySelect,
Wiley‐VCH GmbH. 5, 34, 10556-10561, 2020. https://doi.org/10.1002/slct.202003044

 Aminur Rahman, Solaiman,Tahmina Foyez, Md. Abu Bin Hasan Susan, Abu Bin Imran. Self‐Healable and Conductive Double‐Network Hydrogels with Bioactive
Properties, Macromolecular Chemistry and Physics, Wiley‐VCH GmbH. August 11, 221, 2000207, 2020,
https://doi.org/10.1002/macp.202000207

 Hasanul Banna Muhammad Zukaul Islam, Md. Abu Bin Hasan Susan, and Abu Bin Imran. Effects of Plasticizers and Clays on the Physical, Chemical, Mechanical,
Thermal, and Morphological Properties of Potato Starch-Based Nanocomposite Films, ACS Omega, 5, 28, 17543–17552, July 7, 2020
https://dx.doi.org/10.1021/acsomega.0c02012

 

Student Supervision:

 Master of Philosophy: Design and Fabrication of Homogeneous Hydrogel Network Using Click Chemistry’ Department of Chemistry, Bangladesh University
of Engineering and Technology, Dhaka-1000, Bangladesh (Students name: Md. Kausar Ahmed, Roll No.: 0417033202 P, Date of degree awarded: September 06,
2020).

 

Highlighted publications/ Cover arts

 Front Cover picture in Macromolecular Chemistry and Physics, Wiley-VCH, Self‐Healable and Conductive Double‐Network Hydrogels with Bioactive Properties. Aminur Rahman, Solaiman, Tahmina Foyez, Md. Abu Bin Hasan Susan, and Abu Bin Imran. First published: 07 September 2020 https://doi.org/10.1002/macp.202070039

  

 

Publications in
Scientific Meetings/Bulletins

 Shyla Chowdhury and Abu Bin Imran. Self-healable and mechanically Strong hydrogel using modified nano-cellulose cross Linker’ International Conference on Recent Advanced in Chemistry (ICRAC 2020 Organized by: Department of Chemistry, Jagannath University), Dhaka, Bangladesh February, 7-8, p178, PP-D-07, 2020

 Sarmin Akter and Abu Bin Imran. Synthesis  of  smart  porous Hydrogel by templating method for visual detection and removal  of  toxic  ionic  species International Conference on Recent Advanced in Chemistry (ICRAC 2020 Organized by: Department of Chemistry, Jagannath University), Dhaka, Bangladesh February, 7-8, p115-116, PP-A-01, 2020

 Md. Rezaul Karim and Abu Bin Imran. Effect of particle sizes of nanosilica crosslinker on the mechanical properties of acrylamide-modified silica-based nanocomposite hydrogel, International Conference on Recent Advanced in Chemistry (ICRAC 2020 Organized by: Department of Chemistry, Jagannath University), Dhaka, Bangladesh February, 7-8, p130, PP-A-18, 2020

 Sarmin Akter and Abu Bin Imran. Synthesis of Smart Porous Hydrogel by Templating Method for Visual Detection and Removal of Toxic Ionic Species, international Poster Presentation Competition (IPPC 2020), organized jointly by National Young Academy of Bangladesh (NYAB) , Indian National Young Academy of Sciences
(INYAS), Sri Lankan Academy of Young Scientists (SLAYS) and Thai Young Scientists Academy (TYSA), October 2020.

 
 

 

 

  

 

 2019

 Book chapters:

Superabsorbent Hydrogels from carboxymethyl cellulose. Mohammad Harun-Ur-Rashid and Abu Bin Imran, In: Carboxymethyl Cellulose. Volume I: Synthesis and Characterization, Md. Ibrahim H. Mondal (Editor), Nova Science Publishers, Inc., 400 Oser Avenue, Suite 1600, Hauppauge, NY 11788-3619, USA, ISBN: 978-1-53614-742-1, 159-182, 2019

 Polyrotaxane Actuators. Abu Bin Imran, Mohammad Harun-Ur-Rashid,  and Yukikazu Takeoka, In: Soft Actuators (2nd Edition): Materials, Modeling, Applications, and Future Perspectives, Springer, Springer International Publishing AG, Berlin, Germany. ISBN: 978-981-13-6849-3, 81-147,  2019. https://doi.org/10.1007/978-981-13-6850-9_6

 Student Supervision:

 Master of Philosophy: Self-healable and conductive metal-nanocomposite double- network hydrogels with bioactive properties. Department of Chemistry,
Bangladesh University of Engineering and Technology, Dhaka-1000, Bangladesh (Students name: Aminur Rahman, Student ID No:  0417033201, Date of degree awarded: November 05, 2019)

 Master of Science: Fabrication and Characterization of Mechanically Strong Hydrogel Using Modified Nano-Starch Cross-Linker, Department of Chemistry,
Bangladesh University of Engineering and Technology, Dhaka-1000, Bangladesh (Students name: Tarun Kante Majumder, Roll No: 0416032707F, Date of degree
awarded: March 23, 2019)

 Master of Science: Mechanical Properties Enhancement of Hydrogel using Narrow Dispersed Modified Silica Particles as Cross-Linker, Department of Chemistry,
Bangladesh University of Engineering and Technology, Dhaka-1000, Bangladesh (MD. REZAUL KARIM, Student ID: 0417032708F Session: April 2017, Date of degree
awarded: August 27, 2019)

 Publications in
Scientific Meetings/Bulletins

 Chang
LIU, Hiroaki Gotoh, Imran Abu Bin, Mitsuo Hara, Takahiro Seki, Koichi
Mayumi, Kohzo Ito, Yukikazu Takeoka. Difficulty of polyrotaxane  based movable crosslinked elastomer using
Shape behavior and in-situ X-ray structural analysis. 32nd Annual Meeting of
The Japanese Society for Synchrotron Radiation Research, Fukuoka
International Conference Hall, Fukuoka, Japan. January 09-11, 2019

 Md.
Rezaul Karim and Abu Bin Imran . Mechanical properties enhancement of
hydrogel using narrow disperse modified silica particles as cross-linker, 5th
Conference of Bangladesh Crystallographic Association,  Bangladesh Crystallographic Association ,
University of Dhaka, Dhaka. 25-26 January, 2019 (Best poster award)

 Syed
Sadman Mahmud, Mukta Moni, Hasibul Hasan, Aida Siddique Binty, Tahmina Foyez
, Abu Bin Imran. Determination of Potassium bromate  in breads of Bangladesh by using
spectrophometric method. NSU Public Lecture: “Emerging Public Health
Challenges and Opportunities in Developing countries” NSU Auditorium, North
South University, Bashundhara, Dhaka, March 9, 2019

 Md.
Rezaul Karim1, Abu Bin Imran. Fabrication of highly stretchable hydrogel
using narrow dispersed modified nanosilica particles as cross-linker. BCSIR
Congress 2019 in conjunction with IUFRO WP. Bangladesh Council of Scientific
and Industrial Research (BCSIR), Dhaka. 12-14 December, 2019

 

2018

  Publications in
Scientific Journals

 Chang
LIU, Hiroaki Gotoh, Imran Abu Bin, Mitsuo Hara, Takahiro Seki, Koichi Mayumi,
Kohzo Ito, Yukikazu Takeoka. Optically Transparent, High Toughness Elastomer
Using a Polyrotaxane Cross-linker as a Molecular Pulley, Science Advances, 4 (10), 
1-9 (2018). DOI: 10.1126/sciadv.aat7629
https://doi.org/10.1126/sciadv.aat7629

 

Student Supervision:

 Master of Science: Fabrication of Nanocomposite Hydrogels with
Homogeneous Dispersion of Bioactive Nano Particles, Department of Chemistry,
Bangladesh University of Engineering and Technology, Dhaka-1000,
Bangladesh  (Students name: SOLAIMAN,
Student ID: 0416032706, Date of degree awarded: September 05, 2018)

 Master of Science: Fabrication of pH Sensitive Hydrogel for
Removal of Biohazard Metal Ions and Their Counter Parts
, Department of Chemistry,
Bangladesh University of Engineering and Technology, Dhaka-1000, Bangladesh (Students
name: Noman Chowdhury, Student ID: 0416032709, Date of degree awarded: October
28, 2018)

 Publications in
Scientific Meetings/Bulletins

 Noman
Chowdhury, Abu Bin Imran. Fabrication of pH sensitive hydrogel for
removal of biohazard metal ions and their counter parts, International
conference on Chemical Science & Technology (ICCST-Chem 2018), Department of
Chemistry, KUET, Khulna, Bangladesh 24- 25 February (2018)

 

H
B M Zukaul Islam, Abu bin Imran, Fabrication and Characterization of
biodegradable starch-clay nanocomposite films 4th International Conference On
Structure, Processing and Properties of Materials, Department of Materials
and Metallurgical Engineering (MME), Buet, Dhaka, Bangladesh 1 – 3 March
(2018)

 Noman
Chowdhury, Abu Bin Imran. Fabrication of pH sensitive hydrogel for
removal of biohazard metal ions and their counter parts 4th International
Conference On Structure, Processing and Properties of Materials, Department
of Materials and Metallurgical Engineering (MME), Buet, Dhaka, Bangladesh 1 –
3 March (2018)

 Solaiman
and Abu Bin Imran. Fabrication of Nanocomposite Hydrogels via
Homogeneous Dispersion of Bioactive Nano particles 4th International
Conference On Structure, Processing and Properties of Materials, Department
of Materials and Metallurgical Engineering (MME), Buet, Dhaka, Bangladesh 1 –
3 March (2018)

 Solaiman
and Abu Bin Imran. Fabrication of Antibacterial nanocomposite
Hydrogels via Dispersion of silver nanoparticle into the hydrogel network. International Conference on Nanotechnology and Condensed
Matter Physics 2018, Department of Physics, Bangladesh University of
Engineering and Technology, NT 42, 84-85, January 11-12, (2018)

 Solaiman
and Abu Bin Imran. Fabrication of Antibacterial nanocomposite
Hydrogels via Dispersion of silver nanoparticle into the hydrogel network.
Fourth National Conference of Bangladesh Crystallographic Association,
Department of Chemistry, Mukarram Hossain Khundker Biggan Bhaban, University
of Dhaka, January 20, (2018)

 Solaiman
and Abu Bin Imran. Fabrication of Nanocomposite Hydrogel Prepared by
Homogeneous Dispersion of Bioactive Nanoparticles into the Hydrogel Network
and Investigation of their Antibacterial activity. International Conference
on Chemical Science & Technology and 39th Annual General Meeting of
Bangladesh Chemical Society, Department of Chemistry, Khulna University of
Engineering & Technology, Khulna, Bangladesh 24-25 February, (2018)

 Chang
LIU, Hiroaki Gotoh, Imran Abu Bin, Mitsuo Hara, Takahiro Seki, Koichi
Mayumi, Kohzo Ito, Yukikazu Takeoka.
The
deformation and fracture behavior of polyrotaxane cross-linked elastomer.
Annual meeting of the society of rubber industry, Japan (SRIJ) May 30-June 1,
2018

 Sarmin
Akter, Abu Bin Imran, A porous structural colored hydrogel for visual
detection and removal of toxic ionic species. Bangladesh Chemical Congress
2018, Nabab Nawab Ali Chowdhury Senate Bhaban, Bangladesh Chemical Society,
Dhaka., 17-19 October, 2018 pp126, 166

 Chang
LIU, Hiroaki Gotoh, Imran Abu Bin, Mitsuo Hara, Takahiro Seki, Koichi
Mayumi, Kohzo Ito, Yukikazu Takeoka. Polyrotaxane cross-linked tough
elastomer with freely movable network junctions. The 27th Polymer Material
Forum, Tokyo Funabori Tower Hall, Tokyo, Japan November 21-22, 2018

 H
B M Zukaul Islam, Abu bin Imran. Fabrication and characterizations of
mechanically strong and biodegradable starch-clay nanocomposite films. 3rd International Conference on Emerging
Advanced Nanomaterials (ICEAN) 2018, Global Innovative Center for Advanced
Nanomaterials (GICAN), NEX | Newcastle Exhibition & Conference Centre,
Newcastle NSW, Australia. 30th October – 2nd November 2018.

 

 2017

  Publications in
Scientific Journals

 Yasumoto, A., Gotoh, H., Gotoh, Y., Imran, A.
B., Hara, M., Seki, T., Sakai, Y., Ito, K., Takeoka, Y.; “Highly Responsive
Hydrogel Prepared Using Poly(N‑isopropylacrylamide)-Grafted Polyrotaxane as a
Building Block Designed by Reversible Deactivation Radical Polymerization and
Click Chemistry” Macrmolecules,50 (1), 364-374
(2017).
https://doi.org/10.1021/acs.macromol.6b01955.

   2016

  Publications in
Scientific Journals

 Takeoka, Y.,  
Ohmori, K.,  Imran A. B., Seki,
T., Liu, C.,   Mayumi, K.,  Ito, K.  

“Molecular Weight Dependency of
Polyrotaxane-cross-linked Polymer Gel Extensibility” Chemical Communications, 52, 13757-13759 (2016).
https://doi.org/10.1039/C6CC07641F

 Highlighted publications/ Cover arts

Showcasing
artwork Molecular weight dependency of polyrotaxane-cross-linked polymer gel
extensibility Chem. Commun., 2016, 52, 13757.

 Publications in
Scientific Meetings/Bulletins

 Imran
A. B,
Esaki, K., Gotoh, H., Hara,
M,, Seki, T., Takeoka, Y.,  Sakai, Y.,
Ito, K. Extremely Stretchable Smart Hydrogels Using Slide-Ring Polyrotaxane
Cross-Linker, 16th Asian Chemical Congress
(16ACC) 258-259, 16-19 March, 2016 Dhaka,
Bangladesh

 Watanabe,
K., Seki, T., Takeoka, Y., Urayama, K., 
Imran A. B, Suzuki, M. Development of Inorganic and Organic
Composite Material with High Transparency and Toughness, Formed by the Union
of Fine Silica Particles Aggregation with Short-Range Order and Flexible
Polymer Gel
2016 MRS Fall Meeting & Exhibit, 
Boston, Massachusetts,
November
27-December 2 BM 6.10.40 (2016)

 

  2015

 Edited Book:

 “Innovations in Nanomaterials” Edited by Dr. Al-Nakib
Chowdhury, Dr. Joe Shapter, and  Dr. Abu
Bin Imran. Nova Science Publishers, Inc.,
400 Oser Avenue, Suite 1600, Hauppauge, NY 11788-3619, USA. ISBN: 978-1-63483-572-5,
October 2015

 Publications in
Scientific Meetings/Bulletins

 Imran
A. B,
Esaki, K., Gotoh, H., Hara,
M,, Seki, T., Takeoka, Y.,  Sakai, Y.,
Ito, K.
Poyrotaxane
Cross-linkers: A New Paradigm in Fabrication of Extremely Stretchable Smart Polymer networks , 2015 MRS Fall Meeting
& Exhibit,  Boston, Massachusetts,
November 29-December 4, C3.10 (2015)

 

2014

  Publications in
Scientific Journals

 Imran A. B, Esaki, K., Gotoh, H., Seki, T.,
Ito, K., Sakai, Y., Takeoka, Y. “Extremely stretchable thermosensitive
hydrogels by introducing slide-ring polyrotaxane cross-linkers and ionic
groups into the polymer network” Nature Communications, 5,
5124, 1-8 (2014).
https://doi.org/10.1038/ncomms6124

 Hoque, Md. I., Chowdhury, A-N., Islam, M.,
Firoz, Md. S. H. F., Imran, A. B.,  and
Azam, Md. S.  “Electrochemical
Systhesis of Sulphite Ion Containing Polyaniline Nano-Matrix” Gub Journal of
Science and Engineering, 1(1), 72-76 (2014)

 Student Supervision:

  Master of Philosophy: Fabrication and characterization of bio-degradable
polymer from starch. Department of Chemistry, Bangladesh University of
Engineering and Technology, Dhaka-1000, Bangladesh (Students name: H.B.
Muhammad Zukaul Islam, Student ID No: 0411033211F, Date of degree awarded: June
24, 2014)

   Publications in Scientific Meetings/Bulletins

 Imran A. B, Esaki,
K., Gotoh, H., Seki, T., Ito, K., Sakai, Y., Takeoka, Y. “Extremely
stretchable thermosensitive hydrogels by introducing slide-ring polyrotaxane
cross-linkers and ionic groups into the polymer network” The 2nd
International Symposium on Fusion Materials, Fusion Materials: Creative
Development of Materials and Exploration of Their Function through Molecular
Control, Takeda Hall, The University of Tokyo, Tokyo, Japan.  November 2-4, 2014

 

 2013

 Publications in
Scientific Meetings/Bulletins

 Imran, A. B.,
Seki, T. Takeoka, Y. Polyrotaxane
based sliding Poly(2-hydroxyethyl methacrylate) hydrogels, a potential
candidate for bio-materials”
 Ist
Venture Business Limited (VBL) Seminar, Nagoya University, Nagoya,
Japan,  May 18, 2013 (Invited Lecture)

 Imran, A. B
“Nano-sized particle analyzer by DLS and Zeta potential measurements”
Workshop On Characterization and Application of Novel Functional Materials ,
Development of Novel Functional and Smart Materials for Technological
Applications Higher Education Quality Enhancement Project (HEQEP) University
Grants Commission (UGC), Department of 
Chemistry, University of Dhaka, Bangladesh,  August 31- September 01, 2013 (Instructor)

 

  2012

 Publications in
Scientific Meetings/Bulletins

 Yasomoto,
A., Hiroaki. G., Goto, Y., Imran, A. B., Takeoka, Y., Seki, T., Ito,
K., Sakai, Y. “
Creation of slide-ring gel with controlled dangling chain by click
chemistry and ATRP method”
22nd polymer gel debate,The Society of Polymer Science, Polymer gel Study
Group, University of Tokyo (Tokyo, Japan), January 11, 2012- January 12, 2012

 

 Yasomoto,
A., Hiroaki. G., Goto, Y., Imran, A. B., Takeoka, Y., Seki, T., Ito,
K., Sakai, Y. “
Development of temperature-sensitive slide-ring gel with controlled
dangling chain by click chemistry and 
ATRP method”, 61st Annual Meeting, The Society of Polymer Science,
Pacifico Yokohama (Kanagawa), Japan, may 29-31, 2012

 Yasomoto,
A., Hiroaki. G., Goto, Y., Imran, A. B., Takeoka, Y., Seki, T., Ito,
K., Sakai, Y. “
Preparation of temperature-responsive slide-ring gels structure
controlled by the click chemistry and ATRP” 61st polymer debate, The Society
of Polymer Science, Nagoya Institute of Technology (Aichi), Nagoya, Japan,
September 19-21, 2012

 Yasomoto,
A., Hiroaki. G., Goto, Y., Imran, A. B., Takeoka, Y., Seki, T., Ito,
K., Sakai, Y. “
Characterization and synthesis of precision temperature-responsive
slide-ring gel” Gel workshop in Nagoya, The Society of Polymer Science,
Polymer gel Study Group, KKR Hotel Nagoya (Aichi), Japan, September 21-21,
2012.

 Yasomoto,
A., Hiroaki. G., Goto, Y., Imran, A. B., Takeoka, Y., Seki, T., Ito,
K., Sakai, Y. “
Fabrication of precise-structured thermo-responsive slide-ring gels by
ATRP and click chemistry” Gelsympo2012, Tsukuba International Congress
Center, Ibaraki, Society of Polymer Science, 
polymer gel Study Group, Japan, October 9-12, 2012

Alpha

 Yasomoto,
A., Hiroaki. G., Goto, Y., Imran, A. B., Takeoka, Y., Seki, T., Ito,
K., Sakai, Y. “
Characterization and synthesis of precision temperature-responsive
slide-ring gel using click chemistry and ATRP” 2nd CSJ Chemical Festa, The
Chemical Society of Japan, Tokyo Institute of Technology, Tokyo, Japan,
October 14-17, 2012.

 Kenta, E., Imran,
A. B.
, Seki, T., Ito, K., Takeoka, Y. Fabrication
and Characterization of Thermoresponsive Slide-ring Gel with Ionic
Polyrotaxane as a Crosslinker
MRS Fall Meeting, Materials
Research Society, Hynes Convention Center and the Sheraton Boston
Hotel, Boston, Massachusetts, USA, 
November 25-30, 2012 Abstract ID: N5.56

 

Yasomoto, A., Imran,
A. B.
, Seki, T., Ito, K., Takeoka, Y.  Fabrication of Precise-structured Thermo-sensitive
Slide-ring Gels by ATRP and Click Chemistry
MRS Fall Meeting, Materials Research Society, Hynes
Convention Center and the Sheraton Boston Hotel, Boston, Massachusetts,
USA,  November 25-30, 2012 Abstract ID:
N5.25

  2011

 Proceeding/Extended Abstracts

 G,
Hiroaki., Imran, A. B., Seki, T., Sakai, Y., Ito, K., Takeoka, Y.
“Fabrications and Characterization of slide-ring gels with polyrotaxane-based
Cross-linkers” The 22th Gel Tohronkai 27-28, P1, January 12-13
(2011)  (Japanese and English language)

Kondo,
D., G, Hiroaki., Imran, A. B., Takeoka, Y., Seki, T. “Change in
Aggregation Form of Stimuli-responsive Gel Particles” The 22th Gel
Tohronkai 45-46, P11, January 12-13 (2011) (Japanese and English language)

 Hiroaki.
G., Hara, M., Imran, A. B., Takeoka, Y.,  Seki, T., Sakai, Y., Ito, K.
“Characterization of Slide-ring Elastomers with Polyrotaxane-based
Cross-linkers” The 60th
Polymer Symposium, September 28-30
2Pe075  (2011)
  (Japanese
and English language)

 Yasomoto,
A., Hiroaki. G., Goto, Y., Imran, A. B., Takeoka, Y.,  Seki, T., Ito, K. Sakai, Y. “Precise
Fabrication of Slide-ring Gels by ATRP and Click Chemistry” The 60th Polymer Symposium,
September 28-30 (2011)
  (Japanese and English language)

 

 Publications in
Scientific Meetings/Bulletins

 Kondo,
D., Hiroaki. G., Imran, A. B., Takeoka, Y., Seki, T. “Changing in
Aggregation Form of Stimuli-responsive Gel Particles in Solution”
Nihonkagakkai The 91st Spring Annual Meeting 3E1-31,  March 
26-29 (2011) (Japanese language)

Hiroaki.
G., Imran, A. B., Takeoka, Y., Seki, T., Sakai, Y., Ito, K.
“Fabrication and Characterization of Slide-ring Elastomers” Nihonkagakkai The
91st Spring Annual Meeting 3E1-30, 
March  26-29 (2011) (Japanese
language)

 Kondo,
D., Hiroaki. G., Imran, A. B., Takeoka, Y., Seki, T. “Changing in
Aggregation Form of Stimuli-responsive Gel Particles in Suspension” 60th SPSJ Annual Meeting
, Polymer Preprints, Japan ,
60, 1, 1285,  1K08, May 25-27  (2011)

 Yasomoto,
A., Hiroaki. G., Goto, Y., Imran, A. B., Takeoka, Y., Seki, T., Ito,
K., Sakai, Y. “Precise Fabrication of Slide-ring Gels by ATRP and Click
Chemistry” 60th SPSJ
Annual Meeting
, Polymer Preprints, Japan , 60,
1, 1675,  3Pb106, May 25-27  (2011)

 Hiroaki.
G., Hara, M., Imran, A. B., Takeoka, Y., Seki, T., Sakai, Y., Ito, K.
“Fabrication and Characterization of Slide-ring Elastomers with
Polyrotaxane-based Cross-linkers” 60th
SPSJ Annual Meeting
,  Polymer Preprints, Japan , 60, 1, 1723,  3Pc099, May 25-27  (2011)

 Kondo,
D., Hiroaki. G., Imran, A. B., Takeoka, Y., Seki, T. “
Different State of
Gel Particles Due to the Change in External Environmental Stimuli
The 15th
Annual Symposium on Liquid Crystal Display
, 17,P07, June  4 
(2011)

 Yasomoto,
A., Hiroaki. G., Goto, Y., Imran, A. B., Takeoka, Y., Seki, T., Ito,
K., Sakai, Y. “Preparation of Temperature Responsive Slide-ring Gels by Using
ATRP and Click Chemistry” The 15th Annual Symposium on Liquid Crystal
Display, 13, P03, June  4  (2011)

 Hiroaki.
G., Hara, M., Imran, A. B., Takeoka, Y., Seki, T., Sakai, Y., Ito, K.
“Synthesis and Characterizations of Elastomers Using the Cross-linking Agent
having Ring-motion Effect” The 15th Annual Symposium on Liquid Crystal
Display, 42, P032, June  4  (2011)

 Yasomoto,
A., Hiroaki. G., Goto, Y., Imran, A. B., Takeoka, Y., Seki, T., Ito,
K., Sakai, Y. “
Creation of slide-ring gels structure control using click chemistry and
ATRP method”141st Tokai Polymer Research Lecture, Tokai polymer Study Group,
, The Society of Polymer Science, Japan, August 31, 2011-September 1, 2011.

 Yasomoto,
A., Hiroaki. G., Goto, Y., Imran, A. B., Takeoka, Y., Seki, T., Ito,
K., Sakai, Y. “
Preparation of temperature-responsive slide-ring gel, which is controlled
by the structure click chemistry and ATRP method” 60th Polymer Symposium, The
Society of Polymer Science, Okayama University, Tsushima campus , Okayama,
Japan,  September 28, 2011- September
30 2011.

 Yasomoto,
A., Hiroaki. G., Goto, Y., Imran, A. B., Takeoka, Y., Seki, T., Ito,
K., Sakai, Y. “Fabrication of Thermo-sensitive Slide-ring Gels by Using ATRP
and Click Chemistry”
Gel workshop in Okayama,, Okayama Prefecture , The Society of Polymer
Science, Polymer gel Study Group
, Okayama,  Japan,   September 30-October 1(2011)

 

2010

 Publications in
Scientific Journals

 Imran,
A. B.,
Seki, T., Takeoka, Y.
“Recent Advances in Hydrogels in Terms of Fast Stimuli Sensitivity and
Mechanical Strength” Polymer Journal (Nature Publishing Group, United
Kingdom
)
42, 839–851 (2010). https://doi.org/10.1038/pj.2010.87

 Imran,
A. B.
, Seki, T., Ito, K., Takeoka,
Y. “Facile Synthesis of Sliding Poly(NIPA) Gels Using a Vinyl Modified
Polyrotaxane as a Cross-Linker” Transactions of the MRS-J (Materials Research Society, Japan)  
35, 841-844 (2010). https://doi.org/10.14723/tmrsj.35.841

 Imran, A. B., Seki, T., Ito, K., Takeoka, Y.
“Hydrophobic and Hydrophilic Polyrotaxane Based Movable Cross-Linkers for
Thermo-Sensitive Poly(N-Isopropylacrylamide) Gels”Transactions of
the MRS-J (
Materials
Research Society, Japan)
35(2), 291-297 (2010).
https://doi.org/10.14723/tmrsj.35.291

 Harun-Ur-Rashid,
M., Imran, A. B., Seki, T., Ishii, M., Nakamura, H., Takeoka, Y.
“Angle-Independent Structural Color in Colloidal Amorphous Arrays ”ChemPhysChem.,(Willey-VCH, Germany)
11, 579-583 (2010).
https://doi.org/10.1002/cphc.200900869

 Imran, A. B., Seki, T., Ito, K., Takeoka, Y.
“Poly(N-Isopropylacrylamide) Gel Prepared
Using a Hydrophilic Polyrotaxane-Based Movable Cross-Linker”
Macromolecules. (American Chemical Society, United States)   43 (4), 1975–1980 (2010). https://doi.org/10.1021/ma902349j

 Highlighted publications/ Cover arts

“Angle-Independent Structural Color in Colloidal Amorphous Arrays” Polymer (Hot Topics) (The Society of Polymer Science, Japan) 59, 70 (2010)

 Proceeding/Extended Abstracts

 Imran, A. B., Seki, T.,
Sakai, Y., Ito, K., Takeoka, Y. “Polyrotaxane Based Thermo-Sensitive Ionic
Gels with Prominent Mechanical and Swelling Properties” Asian International
Symposium Abstract in a CD, 3G5-44, March 26-28 (2010) Invited lecture

 Imran, A. B., Seki, T.,
Sakai, Y., Ito, K., Takeoka, Y. “Facile Fabrications of Fast Stimuli
Sensitive and Mechanically Strong Polyrotaxane Based Hydrogels” 59th
Symposium on Macromolecules,  Polymer
preprints 59, 2, 3536-3537,  3J13,
September 15-17  (2010)

 

 Publications in
Scientific Meetings/Bulletins

 Imran, A. B.,
Seki, T., Sakai, Y., Ito, K., Takeoka, Y. “Polyrotaxane Based
Thermo-Sensitive Ionic Gels with Prominent Mechanical and Swelling
Properties.” Asian International Symposium
Abstract in a CD (2010)

 Harun-Ur-Rashid, M., Imran, A. B.,
Seki, T., Takeoka, Y., Ishii, M., Nakamura, H.
Non-iridescent Structural Colors Generated by Self-assembled Amorphous
Microstructures” , The International Conference on Nanophotonics
2010
, (2010)

 

Imran, A. B.,
Seki, T., Sakai, Y., Ito, K., Takeoka, Y.

“Facile Fabrications of Fast Stimuli Sensitive and Mechanically Strong
Polyrotaxane Based Hydrogels” 59th Symposium on Macromolecules Abstract
in a CD,  No. 3J13 (2010)

 Hiroaki.
G., Imran, A. B., Seki, T., Ito, K., Takeoka, Y. “Fabrication and
Characterization of Thermoresponsive Slide-ring Gels with
Poly(N‐isopropylacrylamide) and Polyrotaxane” 59th SPSJ Annual Meeting
, Polymer Preprints, Japan
,  1464, 2Pb118, May 26-28 (2010)

 Hiroaki. G., Imran, A. B., Seki, T., Sakai, Y., Ito, K.,
Takeoka, Y. “ Mechanical Properties of Polyrotaxane Cross-linked
N-isopropylacrylamide Along with Ionic Groups Gels”  The 133th Tokai  Polymer Summer Meeting, P33-M,  September 3-4 (2010)

 Imran, A. B.,
Seki, T., Sakai, Y., Ito, K., Takeoka, Y.

“Facile Fabrications of Fast Stimuli Sensitive and Mechanically Strong
Polyrotaxane Based Hydrogels” 2nd Post Graduate Forum, Tianjin
Polytechnic University (2010)

 Imran, A. B.,
Seki, T., Sakai, Y., Ito, K., Takeoka, Y.
“Fast
Stimuli Responsive and Mechanically Strong Polyrotaxane Based Hydrogels” Pacifichem
2010
(2010)

 2009

  Publications in
Scientific Journals

 Harun-Ur-Rashid, M., Imran,
A. B.
, Seki, T., Ishii, M., Nakamura, H., Takeoka, Y. “Template Synthesis
for Stimuli-Responsive Angle Independent Structural Colored Smart Materials.”
Transactions of the MRS-J (Materials
Research Society, Japan) 34(2), 333-337(2009).
https://doi.org/10.14723/tmrsj.34.333

 Thesis:

 Doctor of Engineering: Facile and Universal Synthesis of
Polyrotaxane Based Stimuli Sensitive Sliding Polymer Gels and Their
Characterizations, Department of Molecular Design and Engineering, Graduate
School of Engineering, Nagoya University, Nagoya, Japan. March, 2009

 

Highlighted publications/ Cover arts

“Fabrication of Mechanically Improved Hydrogels Using a Movable
Cross-linker Based on Vinyl Modified Polyrotaxane”
Polymer (Hot Topics),(The Society of Polymer Science, Japan) 58, 302 (2009)

 Proceeding/Extended Abstracts

 Imran,
A. B.
, Seki, T.,
Kidowaki, M., Ito, K., Takeoka, Y. 
“Synthesis of Mechanically Improved Hydrogels Using a Movable
Cross-linker Based on Vinyl Modified Polyrotaxane” The 20th
Gel Tohronkai, 7-8 (2009)

 Harun-Ur-Rashid,
M., Imran, A. B., Seki, T., Takeoka, Y., Ishii, M., Nakamura, H.
“Template Synthesis of Stimuli-responsive Angle Independent Structural
Colored Gel.” Gel Tohronkai, 33-34 (2009)

 Imran, A. B., Takeoka, Y., Seki, T., Kidowaki, M., Ito, K. “Polyrotaxane Based Mechanically Improved Ionic
Hydrogels and Their Characterizations”
Gelsympo
2009 Polymer Gels: Science and Technology as Advanced Soft Materials,
241-242 (2009)

 Publications in
Scientific Meetings/Bulletins

 Harun-Ur-Rashid,
M., Imran, A. B., Seki, T., Takeoka, Y., Ishii, M., Nakamura, H.
“Template Synthesis of Stimuli-responsive Angle Independent Structural
Colored Gel.” Material Research Society,
BB5.37 (2009)

 Imran, A. B., Seki, T., Kidowaki, M., Ito, K., Takeoka, Y.  “Fabrication of Mechanically Improved Hydrogels
Using a Movable Cross-linker Based on Vinyl Modified Polyrotaxane.”  Material
Research Society
, BB5.9 (2009)

 

Imran,
A. B.
, Seki, T.,
Kidowaki, M., Ito, K., Takeoka, Y. 
“Fabrication of Mechanically Improved Hydrogels Using a Movable
Cross-linker Based on Vinyl Modified Polyrotaxane.” 5th
Yoshimasa Hirata Memorial Lecture and The 1st G-COE International
Symposium on Elucidation and Design of Materials and Molecular Functions
,
106 (2009)

 Harun-Ur-Rashid,
M., Imran, A. B., Seki, T., Takeoka, Y., Ishii, M., Nakamura, H.
“Preparation and Characterization of Angle-independent Structural Colored
Material.” 5th Yoshimasa Hirata Memorial Lecture
and The 1st G-COE International Symposium on Elucidation and
Design of Materials and Molecular Functions
, 107 (2009)

 Imran,
A. B.
, Takeoka, Y., Seki, T., Kidowaki, M., Ito, K.Universal Synthesis of
Polyrotaxane Based Mechanically Improved Stimuli Sensitive Sliding Polymer
Gels and Their Characterizations
  1st FAPS
Polymer Congress
176,
21PS4-032b (2009)

 Harun-Ur-Rashid,
M., Imran, A. B., Seki, T., Takeoka, Y., Ishii, M., Nakamura, H. “
Colloidal
Amorphous: A Source of Viewing Angle Independent Structural Color
1st FAPS polymer
Congress
175,
21PS4-031a (2009)

 Imran, A. B., Takeoka, Y., Seki, T., Ito, K. “Soft, Fast Responsive and Mechanically Improved Hydrogel
Composed of a Movable Polyrotaxane Cross-Linker”
19th
Symposium of MRS-Japan
, H-P11-G (2009)

 Imran,
A. B.
, Takeoka, Y., Seki, T., Ito, K.
“Comparative and Contrastive Studies of Poly(NIPA) Gels Prepared by
Hydrophobic and Hydrophilic Polyrotaxane Based Movable Cross-Linkers”
19th Symposium of MRS-Japan, G-P07-G (2009)

 2008

 Publications in
Scientific Journals

 Murayama, H., Imran, A. B., Nagano, S., Seki, T., Kidowaki, M., Ito, K., Takeoka, Y. “Chromic Slide-Ring Gel based on Reflection from
Photonic Bandgap”
Macromolecules,
(American Chemical Society, United States)  41,
1808-1814 (2008).
https://doi.org/10.1021/ma0715627

 Imran, A. B., Seki, T., Kataoka, T., Kidowaki, M., Ito, K., Takeoka, Y. “Fabrication of Mechanically Improved Hydrogels
Using a Movable Cross-linker Based on Vinyl Modified Polyrotaxane”
Chemical Communications, (Royal Society of Chemistry, United Kingdom)
41, 5227-5229 (2008).
https://doi.org/10.1039/B810290B

 Publications in
Scientific Meetings/Bulletins

 Harun-Ur-Rashid,
M., Imran, A. B., Seki, T., Takeoka, Y., Ishii, M., Nakamura, H.
“Template Synthesis of Stimuli-responsive Angle Independent Structural
Colored Gel” IUMRS-ICA 2008 The IUMRS International Conference in Asia 2008,
Abstract in a CD DP4, December 9-13 (2008)

 2007

Proceeding/Extended Abstracts

 Imran, A. B., Takeoka,
Y.,
Seki,
T., Kataoka, T., Kidowaki, M., Ito, K. “Fabrication and Characterization of
Newly Developed NIPA Gel Using Vinyl Modified Polyrotaxane”
GelSympo 2007 Polymer Gels:
Fundamentals and Functional Control,
7, 71-72, August 6-8 (2007)

 Publications in
Scientific Meetings/Bulletins

 Imran, A. B., Takeoka, Y., Seki, T., Kataoka, T., Kidowaki, M., Ito, K. “Fabrication and Characterization of
Mechanically Improved Sliding Gel by Using Vinyl Modified Polyrotaxane Unit
as A Cross-linker” Bangladesh Chemical Congress 2006, 29,
84-85, March 9-11 (2007)

 Imran, A. B. “Fabrication and Characterization of
Newly Developed NIPA gel Having Good Mechanical Properties Using Vinyl
modified Polyrotaxane” Molecular Assembly System Project, NU, Japan, 11,
1, June 11 (2007)

 

2005

  Thesis:

 Master of Science: Kinetic Investigation on the TiO2-Catalyzed
Photodegradation and Alkaline Fading of Crystal Violet in Aqueous Medium,
Department of Chemistry, Shahjalal University of Science and Technology,
Sylhet, Bangladesh, July, 2005
  

Engineered Nanomaterials for Energy Conversion Cells, Mohammad Harun-Ur-Rashid, and Abu Bin Imran, ,In : Applications of Emerging Nanomaterials and Nanotechnology, Prof. N.B. Singh,  Prof. Md. Abu Bin Hasan Susan, and Dr. Ratiram Gomaji Chaudhary (Editors), Materials Research Forum LLC, Millersville, PA 17551. Materials Research Foundations 148 (2023), 103-126  https://doi.org/10.21741/9781644902554-4

 

Stimuli-responsive and Self-healing Multicomponent Hydrogels for Biomedical Applications, Aminur Rahman and Abu Bin Imran, In: Multicomponent Hydrogels: Smart Materials for Biomedical Applications, Jagan Mohan Dodda, Kalim Deshmukh, Deon Bezuidenhout (Editors), The Royal Society of Chemistry, Cambridge, UK, 2023, Ch17, pp578-603

https://doi.org/10.1039/BK9781837670055-00578

 

Emerging vaccine for treatment of cancer via Nanotechnology, Yeasmin Begum, Tahmina Foyez, and Abu Bin Imran, In: Nanovaccinology: Clinical application of nanostructured materials research to translational medicine, Prof.(Dr) Kaushik Pal (Editor), Springer, Springer International Publishing AG, Berlin, Germany, pp 227–244, 2023, ISBN978-3-031-35394-9  https://doi.org/10.1007/978-3-031-35395-6_13